Magnet Strength of filter rod magnets:

Per customers’ requirements. The highest is up to 14, 000GS (1.4T).
Following is the relationship between diameter, magnetic strength, and Maximum Operation Temperature for reference:

Remarks:
(1).”√”means it can be manufactured on the condition of the diameters listed in the table.”- “means can not be manufactured.

(2). The related Max working temperature from different series.
H series: <=120 SH series: <=150 UH series: <=180 EH series: <=250 (3).Round and square are both available (4). 304 and 316L stainless steel  type are available (5). Magnetic bar length can be custom made. Max's length is 2500mm when the diameter is 25mm. (6). Various end designs are available, such as Nailhead, thread hole, double screw bolt, etc. The size of Filter rod magnets:

The standard diameter we supply is D10, D19, D22, D25, D25.4, D32, D50.8 and etc. The size can be varied at your request.

The rod magnet, magnetic filter rod is usually made of seamed or seamless 304 stainless steel tubes or 316 stainless steel tubes. The tubes can be fine polished and fully welded to meet food grade or pharmacy application.

The standard working temperature is 80℃, but we can offer up to 350℃ to meet your special applications.

By using different grades of rare earth magnets, different magnetic forces are available to meet every customer’s requirement, the highest magnetic force of diameter 25mm magnetic bar can achieve 14,000GS(1.4T).

Magnet Strength of magnetic filter rod:

Per customers’ requirements. The highest is up to 14, 000GS (1.4T).
Following is the relationship between diameter, magnetic strength, and Maximum Operation Temperature for reference:

Remarks:
(1).”√”means it can be manufactured on the condition of the diameters listed in the table.”- “means can not be manufactured.

(2). The related Max working temperature from different series.
H series: <=120
SH series: <=150
UH series: <=180
EH series: <=250

(3).Round and square are both available

(4). 304 and 316L stainless steel  type are available

(5). Magnetic bar length can be custom made. Max’s length is 2500mm when the diameter is 25mm.

(6). Various end designs are available, such as Nailhead, thread hole, double screw bolt, etc.

The size of Magnetic Filter Rod

The standard diameter we supply is D10, D19, D22, D25, D25.4, D32, D50.8 and etc. The size can be varied at your request.

The magnetic tube, the magnetic filter tube is usually made of seamed or seamless 304 stainless steel tubes or 316 stainless steel tubes. The tubes can be fine polished and fully welded to meet food grade or pharmacy application.

The standard working temperature is 80℃, but we can offer up to 350℃ to meet your special applications.

By using different grades of rare earth magnets, different magnetic forces are available to meet every customer’s requirement, the highest magnetic force of diameter 25mm magnetic bar can achieve 14,000GS(1.4T).

Magnet Strength of magnetic tubes:

Per customers’ requirements. The highest is up to 14, 000GS (1.4T).
Following is the relationship between diameter, magnetic strength, and Maximum Operation Temperature for reference:

Remarks:
(1).”√”means it can be manufactured on the condition of the diameters listed in the table.”- “means can not be manufactured.

(2). The related Max working temperature from different series.
H series: <=120 SH series: <=150 UH series: <=180 EH series: <=250 (3).Round and square are both available (4). 304 and 316L stainless steel  type are available (5). Magnetic bar length can be custom made. Max's length is 2500mm when the diameter is 25mm. (6). Various end designs are available, such as Nailhead, thread hole, double screw bolt, etc. The size of Magnetic Tubes

The standard diameter we supply is D10, D19, D22, D25, D25.4, D32, D50.8 and etc. The size can be varied at your request.

The magnetic tube, the magnetic filter tube is usually made of seamed or seamless 304 stainless steel tubes or 316 stainless steel tubes. The tubes can be fine polished and fully welded to meet food grade or pharmacy application.

The standard working temperature is 80℃, but we can offer up to 350℃ to meet your special applications.

By using different grades of rare earth magnets, different magnetic forces are available to meet every customer’s requirement, the highest magnetic force of diameter 25mm magnetic bar can achieve 14,000GS(1.4T).

The Critical Parameter of Magnetic Boiler Filter Bars:

1. The diameter and length of the magnetic boiler filter.
2. The number of magnets for each filter.
3. Max. Surface Gauss value of the magnetic boiler filter.
4. Connections of the magnetic boiler filter bars.

Features of Magnetic boiler filter bars:

1, Both ends of the magnetic filter bars are TIG welded.

We have done dropping test before, drop two kinds of the magnetic bar from 1 meter high, one is TIG welded for 2 end plugs, another is laser welded for 2 end plugs, there are about 5% laser welding bars were cracked but zero for TIG welding, that means bars with TIG welding are more durable.

2, Surface roughness reaches 600 Mesh.

Most of our magnetic bars are used in the food industry, it needs a high requirement of surface appearance, so we added 4 polishing process to meet the good surface roughness.

The standard working temperature is 80℃, but we can offer up to 200℃ to meet your special applications.

By using different grades of rare earth magnets, different magnetic forces are available to meet every customer’s requirement, the highest magnetic force of diameter 25mm magnetic bar can achieve 14,000GS(1.4T).

These magnetic filter bars have a large Gauss value because of their length and depth of field and generate very high levels of magnetism despite their relatively small surface pole area. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

Permanent magnetic filter bars can be installed at any point in solid or liquid material flows. They can be used up to temperatures of 150°C. The filter bars are manufactured from powerful ceramic magnets in a stainless steel (AISI 304) casing.

This construction has a high degree of corrosion resistance and is quick and easy to clean. The standard diameters of the filter bars are 25.4 or 40 mm and the ends have M8 threaded holes so they can be easily installed in almost any position.

Magnet Strength of square magnetic filter bars:

Per customers’ requirements. The highest is up to 14, 000GS (1.4T).
Following is the relationship between diameter, magnetic strength, and Maximum Operation Temperature for reference:

Remarks:
(1).”√”means it can be manufactured on the condition of the diameters listed in the table.”- “means can not be manufactured.

(2). The related Max working temperature from different series.
H series: <=120 SH series: <=150 UH series: <=180 EH series: <=250 (3).Round and square are both available (4). 304 and 316L stainless steel  type are available (5). Magnetic bar length can be custom made. Max's length is 2500mm when the diameter is 25mm. (6). Various end designs are available, such as Nailhead, thread hole, double screw bolt, etc. The size of square magnetic filter bars

The standard diameter we supply is D10, D19, D22, D25, D25.4, D32, D50.8 and etc. The size can be varied at your request.

The square magnetic filter bars is usually made of seamed or seamless 304 stainless steel tubes or 316 stainless steel tubes. The tubes can be fine polished and fully welded to meet food grade or pharmacy application.

The standard working temperature is 80℃, but we can offer up to 350℃ to meet your special applications.

By using different grades of rare earth magnets, different magnetic forces are available to meet every customer’s requirement, the highest magnetic force of diameter 25mm magnetic bar can achieve 14,000GS(1.4T).

Magnet Strength of filter rod magnets:

Per customers’ requirements. The highest is up to 14, 000GS (1.4T).
Following is the relationship between diameter, magnetic strength, and Maximum Operation Temperature for reference:

Remarks:
(1).”√”means it can be manufactured on the condition of the diameters listed in the table.”- “means can not be manufactured.

(2). The related Max working temperature from different series.
H series: <=120 SH series: <=150 UH series: <=180 EH series: <=250 (3).Round and square are both available (4). 304 and 316L stainless steel  type are available (5). Magnetic bar length can be custom made. Max's length is 2500mm when the diameter is 25mm. (6). Various end designs are available, such as Nailhead, thread hole, double screw bolt, etc. The size of filter rod magnets

The standard diameter we supply is D10, D19, D22, D25, D25.4, D32, D50.8 and etc. The size can be varied at your request.

The magnetic tube, the magnetic filter tube is usually made of seamed or seamless 304 stainless steel tubes or 316 stainless steel tubes. The tubes can be fine polished and fully welded to meet food grade or pharmacy application.

The standard working temperature is 80℃, but we can offer up to 350℃ to meet your special applications.

By using different grades of rare earth magnets, different magnetic forces are available to meet every customer’s requirement, the highest magnetic force of diameter 25mm magnetic bar can achieve 14,000GS(1.4T).

Magnet Strength of magnetic rods:

Per customers’ requirements. The highest is up to 14, 000GS (1.4T).
Following is the relationship between diameter, magnetic strength, and Maximum Operation Temperature for reference:

Remarks:
(1).”√”means it can be manufactured on the condition of the diameters listed in the table.”- “means can not be manufactured.

(2). The related Max working temperature from different series.
H series: <=120
SH series: <=150
UH series: <=180
EH series: <=250

(3).Round and square are both available

(4). 304 and 316L stainless steel  type are available

(5). Magnetic bar length can be custom made. Max’s length is 2500mm when the diameter is 25mm.

(6). Various end designs are available, such as Nailhead, thread hole, double screw bolt, etc.

The size of the Magnetic Rods

The standard diameter we supply is D10, D19, D22, D25, D25.4, D32, D50.8 and etc. The size can be varied at your request.

The magnetic rods, the magnetic filter rods are usually made of seamed or seamless 304 stainless steel tubes or 316 stainless steel tubes. The tubes can be fine polished and fully welded to meet food grade or pharmacy application.

The standard working temperature is 80℃, but we can offer up to 350℃ to meet your special applications.

By using different grades of rare earth magnets, different magnetic forces are available to meet every customer’s requirement, the highest magnetic force of diameter 25mm magnetic bar can achieve 14,000GS(1.4T).

Magnetic Rod, Magnetic rod filters(Magnetic Separator) provides an effective means of removing ferrous chips and metal particles from loosely packed, free-flowing materials. They are usually constructed of 304 stainless steel tubes or 316 stainless steel tubes for special domains filled with Ceramic or Rare Earth Magnet. Either round or square shape bars are available for customers’ desiring for special applications.

Application of magnetic rod:

Magnetic rods, magnetic rod filters may apply in medicines, sanitation, textile, machinery, and foodstuffs. The filer will attract iron/steel substances away from liquids, from among grains or powders.

Maximum Operation Temperature:

6 series is available for the customer to choose from

N series up to 80 degrees C
M series up to 100 degrees C
H series up to 120 degrees C
SH series up to 150 degrees C
UH series up to 180 degrees C
EH series up to 200 degrees C

Threaded Hole of Magnetic Rod:

1, Tapped threaded holes at each end for easy installation.

2, Tapped one threaded hole at one end, and the other end is plain welded.

3, Both of ends are plain welded.

Magnet Strength of magnetic rod:

Per customers’ requirements. The highest is up to 12, 000GS (1.2T).
Following is the relationship between diameter, magnetic strength, and Maximum Operation Temperature for reference:

Remarks:
(1).”√”means it can be manufactured on the condition of the diameters listed in the table.”- “means can not be manufactured.

(2). The related Max working temperature from different series.
H series: <=120 SH series: <=150 UH series: <=180 EH series: <=250 (3).Round and square are both available (4). 304 and 316L stainless steel  type are available (5). Magnetic bar length can be custom made. Max's length is 2500mm when the diameter is 25mm. (6). Various end designs are available, such as Nailhead, thread hole, double screw bolt, etc. The size of Magnetic Rod

The standard diameter we supply is D10, D19, D22, D25, D25.4, D32, D50.8 and etc. The size can be varied at your request.

The magnetic rod, magnetic filter rod is usually made of seamed or seamless 304 stainless steel tubes or 316 stainless steel tubes. The tubes can be fine polished and fully welded to meet food grade or pharmacy application.

The standard working temperature is 80℃, but we can offer up to 350℃ to meet your special applications.

By using different grades of rare earth magnets, different magnetic forces are available to meet every customer’s requirement, the highest magnetic force of diameter 25mm magnetic bar can achieve 12,000GS(1.2T).